Timken® NJ318EMA Enhanced Geometry Type NJ Radial Cylindrical Roller Bearing, 90 mm Dia Bore, 190 mm OD, Single Rows, 43 mm W, 359 kN Dynamic/362 kN Static Load
A radial cylindrical roller bearing consists of an inner and/or outer ring and a complement of controlled-contour cylindrical rollers. Depending on the style of bearing, either the inner or the outer ring will have two roller-guiding ribs. The other ring, separable from the assembly, has one rib or none. The ring with two ribs axially locates the position of the roller assembly. The diameters of these ribs may be used to support the roller. One of the ribs may carry light thrust loads when an opposing rib is provided in the mating ring.
Timken® Radial Cylindrical Roller Bearing, Enhanced Geometry Type NJ, 90 mm Bore Dia, 190 mm Outside Dia, Single Rows, 43 mm W, Open Closure, 359 kN Dynamic/362 kN Static, Chrome Steel Bearing, Brass Cage, 3500 rpm Grease/4000 rpm Oil Maximum, 302 deg F, Uncoated
Bearing Material | : | Chrome Steel |
Finish | : | Uncoated |
Load Capacity | : | 359 kN Dynamic/362 kN Static |
Maximum Speed | : | 3500 rpm Grease/4000 rpm Oil |
Outside Diameter | : | 190 mm |
Number of Rows | : | Single |
Width | : | 43 mm |