SKF® SY 1.1/4 FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4-22/32 to 5-5/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL x 3.687 in OAH
Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are pre-lubricated and are designed to slip fit on to the shaft. Locking method is either setscrew locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 1-1/4 in Bore, 4-22/32 to 5-5/16 in Bolt Center-to-Center Length, 1-7/8 in Base to Bore Centerline, 6-9/16 in Overall Length, 3.687 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.803 in Base Width, Eccentric Collar Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 5740 lb Dynamic/3440 lb Static Load, 5300 rpm Maximum, Cast Iron, Uncoated
Base Width | : | 1.803 in |
Base to Bore Centerline | : | 1-7/8 in |
Series | : | SY Series |
Bolt Center-to-Center Length | : | 4-22/32 to 5-5/16 in |
Mounting Type | : | Two-Bolt Base |
Expansion Type | : | Non-Expansion (Fixed) |
Locking Device | : | Eccentric Collar |
Finish | : | Uncoated |
Overall Length | : | 6-9/16 in |
Load Capacity | : | 5740 lb Dynamic/3440 lb Static |
Material | : | Cast Iron |
Maximum Speed | : | 5300 rpm |
Overall Height | : | 3.687 in |
Seal Type | : | Single Lip |